high-quality commodi...
US$ 10.00
US$ 328.00
The model Q125 2000A current transformer clamp on measuring instrument can be used for a current vector for the copper bar or the power aluminum bus bar on-line detection. It has a 120mm * 50mm square hole, make it specially suitable for bus bar current measurement. In this method, there is no need to break a circuit or to affect the isolation to measure the current. it can be applied for energy meter & power meter, Standard IEC61869 & CE. easy installation, measurement 3000A big current value.
Ratio 1000: 1 or 2000:1 (customized)
Accuracy class 0.2%, 0.5%, 1%
Primary current 0 - 3000A AC
Secondary current 0 - 5A AC (customized)
Max. Cont. Input current 3600A
Over voltage category CAT III 600 V
Output signal (AC current) 500mA,1A,5A AC at nominal input current
Output signal (AC voltage) 333mV,500mV,1V,5V AC at nominal input current
Frequency range 40Hz-2000Hz
Dielectric strength 3KV 50Hz/60Hz at 1 minute
Temperature range -20°C to +55°C
Output 2.5 meter cable with D01 connector
Max. voltage not insulated conductors 720 V
Standard EN 61010-1, EN 61010-2-032, EN 61010-2-031
IEC60044-1, & IEC61869-2, 600V CAT III
Installation Clamp type
Output mode Lead output (2.5m)
Connector BNC, 4mm banana, signal cable(2 cores),customized
Mechanical parameters
Dimensions (L x W x H) (mm) 116 x 327 x 35
Weight (g) 1200
Holding wire diameter (mm) φ120 x 50
Max. jaw opening (mm) 50
Jaw color White or Blue
Material PC+ABS, UL94 V0
Published date:
May 19, 2022 11:11 am
Expiration date:
December 31, 9999
Safety Tips
Contact publisher
You must log in or register a new account in order to contact the publisher
high-quality commodi...
US$ 10.00
3-OXO-4-PHENYL-BUTYR...
US$ 15.00
BMK methyl glycidate...
US$ 25.00
lower CAS 23076-35-9...
US$ 1.00