L-DIHYDROOROTIC ACID...
US$ 45.00
US$ 158.00
The model Q20A 100A current clamp sensor is ideal for using with electronic meter or other device with AC current input, it is suitable for 100A cable online measurement, max 200A. Only weight 300g, it has high accuracy class 0.1% and wide frequency range from 10Hz to 20KHz. Clamp type structure and non-contact measurement, easy to operate, fast, safe and reliable. it can be used for power analyzer, watt-hour meter tester & smart power meter.
Ratio 1000: 1, 2000:1 or 2500:1 (customized)
Accuracy class 0.1%, 0.2%, 0.5%
Primary current 0 - 100A AC, 0 - 200A AC
Secondary current 0 - 100mA AC, 0 - 200mA AC (customized)
Max. Cont. Input current 240A
Load capacity ≤10Ω , Standard 4Ω
Over voltage category CAT III 600V
Output signal (AC current) From 0 to 200mA AC at nominal input current
Output signal (AC voltage) From 0 to 200mV AC at nominal input current
Signal ratio 1mA/A, 1mV/A, 10mV/A, 100mV/A
Frequency range 40Hz-20000Hz
Signal ratio 1mA/A, 1mV/A, 10mV/A, 100mV/A
Dielectric strength 3KV 50Hz/60Hz at 1 minute
Temperature range -20°C to +55°C
Output 2.5 meter cable with D01 connector
Max. voltage not insulated conductors 720 V
Standard EN 61010-1, EN 61010-2-032, EN 61010-2-031
IEC60044-1, & IEC61869-2, 600V CAT III
Installation Clamp type
Output mode Lead output (2.5m)
Connector BNC, 4mm banana, Audio plug,customized
Mechanical parameters
Dimensions (L x W x H) (mm) 48 x 186 x 27
Weight (g) 300
Holding wire diameter (mm) φ20
Max. jaw opening (mm) 20
Jaw color Black
Material PC+ABS+Polycarbonate, UL94 V0
Published date:
May 19, 2022 11:04 am
Expiration date:
December 31, 9999
Safety Tips
Tel.: 15910663251
Region: Alabama
City: Abbeville
Contact publisher
You must log in or register a new account in order to contact the publisher
L-DIHYDROOROTIC ACID...
US$ 45.00
high-quality commodi...
US$ 10.00
3-OXO-4-PHENYL-BUTYR...
US$ 15.00
BMK methyl glycidate...
US$ 25.00