high-quality commodi...
US$ 10.00
US$ 198.00
The model XQ20 clamp on current sensor is suitable for 200A cable online measurement, the user friendly shape make It easily clamp onto cables or bus bars, no need to interrupt the power supply and disconnect the circuit in testing, easy to carry and especially suitable for on-site online testing. It output 0-200mA or 0-100mA AC signal for measuring and analyzing system. This XQ20 current sensor can customized two stall 10A/100A or 20A/200A, 1V or 2V output. It have been used many in power quality analyzer manufacturers, high reliability and accuracy 0.1%.
Electrical parameters
Ratio 1000: 1, 2000:1 or 2500:1 (customized)
Accuracy class 0.1%, 0.2%
Primary current 0 - 100A AC, 0 - 200A AC
Secondary current 0 - 100mA AC, 0 - 200mA AC (customized)
Max. Cont. Input current 120A, 240A
Load capacity ≤20Ω , Standard 4Ω
Over voltage category CAT III 600V
Output signal (AC current) From 0 to 200mA AC at nominal input current
Output signal (AC voltage) From 0 to 5V AC at nominal input current
Signal ratio 1mA/A, 1mV/A, 10mV/A, 100mV/A
Frequency range 10Hz-200KHz
Dielectric strength 3KV 50Hz/60Hz at 1minute
Temperature range -20°C to +55°C
Output 2.5 meter cable with D01 connector
Max. voltage not insulated conductors 720 V
Standard EN 61010-1, EN 61010-2-032, EN 61010-2-031
IEC60044-1, & IEC61869-2, 600V CAT III
Installation Clamp type
Output mode Lead output (2.5m)
Connector BNC, 4mm banana, Audio plug,customized
Mechanical parameters
Dimensions (L x W x H) (mm) 52.5 x 137.5 x 28
Weight (g) 400
Holding wire diameter (mm) φ20
Max. jaw opening (mm) 20
Jaw color Red, yellow, blue, green, black
Material PC+ABS+Polycarbonate, UL94 V0
Published date:
May 19, 2022 11:02 am
Expiration date:
December 31, 9999
Region:
Hawaii
City:
Capehart
Safety Tips
Contact publisher
You must log in or register a new account in order to contact the publisher
high-quality commodi...
US$ 10.00
3-OXO-4-PHENYL-BUTYR...
US$ 1.00
BMK methyl glycidate...
US$ 1.00
lower CAS 23076-35-9...
US$ 1.00