L-DIHYDROOROTIC ACID...
US$ 45.00
US$ 350.00
The model Q150 current transformer clamp can be used in large current situation and cooperate to cable fault tester and cable identification device, used for cable test work. It can even measure up to 3000A AC large current and output 0-5A AC current for other measuring or analyzing system. It can provide 0.5% accuracy class result, ratio 1000/5A, 2000/5A or 3000/5A. Suitable for power plants, factoris and mines to measure power load.
Ratio 600: 1 , 1000:1, 2000:1, 3000:1 (customized)
Accuracy class 0.2%, 0.5%, 1%
Primary current 0 - 3000A AC
Secondary current 0 - 5A AC (customized)
Max. Cont. Input current 3600A
Load capacity ≤2.5VA or 20Ω
Over voltage category CAT III 600 V
Output signal (AC current) 500mA,1A,5A AC at nominal input current
Output signal (AC voltage) 333mV,500mV,1V,5V AC at nominal input current
Frequency range 40Hz-2000Hz
Dielectric strength 3KV 50Hz/60Hz at 1 minute
Temperature range -20°C to +55°C
Output 2.5 meter cable with D01 connector
Max. voltage not insulated conductors 720 V
Standard EN 61010-1, EN 61010-2-032, EN 61010-2-031
IEC60044-1, & IEC61869-2, 600V CAT III
Installation Clamp type
Output mode Lead output (2.5m)
Connector BNC, 4mm banana, signal cable(2 cores),customized
Mechanical parameters
Dimensions (L x W x H) (mm) 229x364x 44
Weight (g) 1700
Holding wire diameter (mm) φ150
Max. jaw opening (mm) 150
Jaw color White
Material PC+ABS, UL94 V0
Published date:
May 19, 2022 11:13 am
Expiration date:
December 31, 9999
Safety Tips
Contact publisher
You must log in or register a new account in order to contact the publisher
L-DIHYDROOROTIC ACID...
US$ 45.00
high-quality commodi...
US$ 10.00
3-OXO-4-PHENYL-BUTYR...
US$ 15.00
BMK methyl glycidate...
US$ 25.00