The Model D20 AC/DC current clamp is a portable 100A/200Arms current probe with insulated BNC output cable that can accurately measure AC or DC current waveforms. The unit has proportional mV output for direct readings on oscilloscopes from DC to 1MHz at -3dB. The D20 is power by a rechargeable multimeter battery or from a 9 V power signal cable. It is the perfect tool for most of the oscilloscopes.
The D20 current clamp is a general purpose 200A AC/DC current probe designed for use with DMMs, oscilloscopes, power loggers and energy meter calibration instruments that have a current input. It has a 1000:1 ratio and output of 10mV per amp measured in the jaw. The D20 current probe has an integral 2.5m lead terminated. The rounded jaw design on this current clamp makes it well-suited for power applications where high linearity 0.1% and low phase shift and wide frequency response up to 200kHz are important
■ UL, CE, CNAS mark;
■ 10mV/A output signal;
■ Frequency 1MHz Bandwidth;
■ With harmonic measurement;
■ Holding wire diameter: φ20mm;
■ Conforms to EN 61010, 600V CAT III;
■ Low phase shift for power measurement;
■ High content nickel metal permalloy core;
■ Frequency response from DC to 200 KHz;
■ Measurement range 0-100A/0-200 AC/DC;
■ Improved ergonomic design & easy operation;
■ High precision 0.5% for DC current measurement;
■ Automatic compensation for earth's magnetic influence;
■ Designed for DMMs, oscilloscopes, recorders, loggers, harmonic meters;
May 19, 2022 11:17 am
December 31, 9999
You must log in or register a new account in order to contact the publisher
BMK methyl glycidate...
lower CAS 23076-35-9...